4+W Red Laser Plug & Play- Corrective Tight Beam/Analog Modulation PSU-TEC

Description

Plug & Play 115 VAC over 4-1/4 Watts, measured 4250mW of Brilliant Red Laser with Corrective Tight Beam/Analogue Modulation w/ PSU-TEC Cooling.
I paid 00 for just the head/PS, I added the TEC cooling and system heat sink. Priced for quick sale. Extremely powerful laser for any wavelength particularly red, I measured 4200 milliwatts then never ran the laser again until I fired it up for the pics in this eBay listing. Comes with complimentary safety glasses required for these extremely high power levels. After buying the head/PS I bought 0.1mm Indium foil and mounted the head to a cold plate for intimate thermal coupling of the head to the heat sink which has the TEC between the cold plate and finned heat sinks. The laser can be adjusted to any power level from a few milliwatts to full power. This would be a awesome light show laser with a 2 Watt green and 5 Watt blue laser combined into a single >10 Watt white laser beam.
Thank You.
Main Features:
Specification：
Model: RL4000
wavelength(nm): 638nm
Output power(mw): 4000mW+
Power supply: 12V/115 VAC input
Transverse mode: Near TEM00
Operating mode: CW
Power stability (rms, over 4 hours) : <5%
Warm-up time (minutes): <5
Beam divergence, full angle (mrad): <2.5×0.5 (Beam with correction)
Beam diameter at the aperture (mm): ~3×3
Beam height from base plate (mm): 21
Operating temperature (℃): 10～35
Dimensions of Laser Head (mm): 220×180×50
Modulation option: TTL modulation 0-5V 30kHz